Epoxy Flake Floors in Shreveport, LA

Epoxy flake floors are the finish most Shreveport homeowners choose for a garage, and the reasons are practical. A flake floor hides dust, tire marks and small scuffs between cleanings. It adds texture so the floor has some grip when a wet car pulls in after a storm. It also covers the patched cracks and color differences that older concrete tends to have. On page one of a local search, the questions people post ask for custom flake blends by name, so it is clearly the look many people here want.

How a flake floor is built

A flake floor is a layered system.

• The slab is diamond ground and repaired.
• A pigmented epoxy base coat goes down.
• While the base is wet, colored vinyl flakes are broadcast by hand until no base color shows. This is called broadcasting to refusal.
• Once the base cures, the loose flake is swept up and the surface is scraped to knock down sharp edges.
• One or two clear topcoats seal the flake in.

The topcoat controls how the floor feels. More topcoat gives a smoother surface that is easier to clean. Less gives more texture and grip.

Full broadcast or partial

A full broadcast covers the whole base in chips and is the toughest, most forgiving option. A partial broadcast scatters chips over a solid color for a lighter, more speckled look. Partial floors show dirt more and have less texture, but some people prefer them for laundry rooms and workshops. We bring sample boards of both so you can compare.

Picking a blend

Flake comes in sizes from about 1/16 inch up to 1/4 inch and in blends of two to five colors. Larger chips give a bolder pattern. Smaller chips read almost like granite from a few feet away. Medium grays and tans hide dust well. Very light blends show tire marks, and very dark ones show dried water spots, which matters with Shreveport's 51-plus inches of yearly rain. We help you choose after seeing your space and lighting.

The slab still matters most

Chips do not fix a bad bond. If the base coat goes onto damp or poorly prepared concrete, the whole layered system can lift together. Clay soils around Shreveport move slabs and crack them, so we fill stable cracks and handle moving joints before the base coat goes down. We also take moisture readings, since humid weather and slow-draining ground keep many slabs damp.

Topcoat choice

On an interior garage we usually top flake with polyaspartic or a polyurethane clear. HomeGuide rates standard epoxy's UV resistance as poor to fair and polyaspartic's as excellent. That matters on a west-facing garage where the afternoon sun reaches deep into the room. For porches and other outdoor spots, a UV-stable topcoat is the only sensible choice.